What does a pre-pour (slab) inspection check?
A pre-pour inspection happens after the slab is formed up and steel-fixed, but before the concrete truck arrives — because once it's poured, none of it can be checked again. It's the most time-critical stage inspection on a build.
What we check
Our builder-inspector checks the set-out and dimensions against your plans, the formwork and slab edges, the steel reinforcement and its cover and supports, the vapour barrier and its laps and penetrations, and the site drainage and finished slab height relative to the surrounding ground. We also look at the ground falling away from the building — the ground next to the house should slope down and away so rain runs off, not back toward the slab.
Where a requirement has a clear figure, we reference it: slab and footing design for the site classification sits under AS 2870, and the ground should fall away from the building per the ABCB Housing Provisions.
Why it matters
If the steel, cover or membrane isn't right, it goes on the builder's list to fix before the pour — far cheaper and simpler than discovering a problem in a finished slab. A stage inspection like this is from $550 and comes with a same-day digital report.
Book a pre-pour inspection online or call 07 3180 8041 — book early, the window is tight.
Frequently asked questions
When exactly should the pre-pour inspection happen?
After the slab is formed and steel-fixed but before the concrete is poured. Give us your expected pour date as early as you can because the window is short.
What happens if something isn't right at pre-pour?
It goes on the builder's action list to correct before the pour. Fixing steel, cover or membrane now is far cheaper than any remedy once the slab is cast.
Related
Book your inspection
QBCC Licensed · Same-week availability · Same-day report