Handover (PCI) Inspections on the Sunshine Coast
Your handover inspection is the last check before the final payment and the keys. We inspect new homes across the Sunshine Coast's growth corridor: Aura (Baringa, Nirimba, Banya, Gagalba), Harmony at Palmview, Sippy Downs, Little Mountain, Meridan Plains and out to Gympie. Every VG Inspect inspector is a licensed builder who has built more than 300 homes, and your photo report is sent to you on site, before we leave. Each item is referenced to the QBCC Standards and Tolerances Guide, the NCC or the relevant Australian Standard, so your builder can act on it straight away.
Book an InspectionHandover (PCI) Inspection from $660 · Same-day digital report · QBCC Licence 1318443 · Call 07 3180 8041
What we find at handover in SEQ
Across 85 new South East Queensland homes we inspected at handover, the median home had 11 defects.
- 3 in 4 had paint issues (coverage, touch-ups, finish)
- 62% had roof or gutter defects
- 62% had tiling, grout or silicone defects
- 53% had external wall, cladding or render defects
- Almost half still had incomplete work on the day the builder called it complete
SEQ-wide figures from VG Inspect reports, 2026. We'll publish Sunshine Coast-only figures once we have enough local inspections to keep them anonymous.
What's different on the coast
- Salt air and fixings: Close to the coast, we check exposed fixings, flashings, balustrade brackets and gutters for the right corrosion class and for damage from the build. Fixes are cheap at handover and expensive once rust starts.
- Wind-driven rain: We look harder at window and door seals, cladding junctions and penetrations, because coastal storms push water sideways.
- Sandy and filled lots: We check that the ground falls away from the slab (at least 50 mm over the first metre, ABCB Housing Provisions 3.3.3) and that the slab edge stays exposed for termite inspection (at least 75 mm, AS 3660.1).
- Big estates, fast builds: In Aura and Harmony, many homes go up side by side on tight programs, so handover dates move. Tell us the date as soon as you have it.
The rule behind it
Finishes are judged from 1.5 m
Paint, plaster and other finishes are assessed from 1.5 m away in normal light — not with your nose against the wall. It keeps the conversation with your builder about the rule, not opinion.
QBCC Standards & Tolerances Guide, cl. 1.4The ground must fall away from the slab
Finished ground should fall at least 50 mm over the first metre away from the slab, so stormwater drains away from the house instead of pooling against it.
ABCB Housing Provisions 3.3.3(a)Why a handover (pci) inspection matters in Sunshine Coast
The handover/PCI is your last leverage before the final payment — a documented defect list the builder is contractually expected to rectify. Get the date to your inspector early, because builders often give short notice.
At Sunshine Coast handover we commonly flag paint coverage and finish, tile lippage and grout and silicone quality, chips and scratches to glass and cabinetry, door and window alignment and function, external sealing and moisture-exposed junctions, and plumbing and drainage, judged against the QBCC Standards and Tolerances Guide and its viewing-distance rules such as 1.5m for walls.
Local conditions in Sunshine Coast
Sunshine Coast new builds centre on the Aura (Caloundra West), Palmview, Sippy Downs, Little Mountain and Meridan Plains growth areas. The coastal climate — wind-driven rain and high humidity — makes waterproofing, roof and cladding details especially important, and many lots are on engineered fill. We inspect new builds across the coast and send the photo report the same day, referenced to the NCC, Australian Standards and the QBCC guide.
What we check at the handover (pci) stage
At practical completion, before you sign off and pay the final claim, we check every finished element against the QBCC Standards and Tolerances Guide:
Finishes & function
- Paint, plaster, tiling, grout and silicone to the QBCC tolerances
- Doors, windows and cabinetry operation and alignment
- Floor, wall and ceiling finishes from a normal viewing position
Services & external
- Plumbing, electrical and functional checks
- External cladding, roof, gutters and drainage
- Site, paths and any damage before handover
Every item is photographed and referenced to the relevant Australian Standard, NCC clause or the QBCC Standards and Tolerances Guide, then delivered in a same-day digital report you can hand straight to your builder. See the full handover (pci) inspection details, or read how to choose a new-build inspector in Queensland.
Other inspection stages across Sunshine Coast
Most owners book several stages so defects are caught before the next trade covers them. Alongside the handover (pci) inspection, we also inspect across Sunshine Coast:
Suburbs we cover in Sunshine Coast
We inspect new builds across the whole Sunshine Coast Council area, including:
- Building inspections in Caloundra West
- Building inspections in Sippy Downs
- Building inspections in Little Mountain
- Building inspections in Meridan Plains
- Building inspections in Palmview
- Building inspections in Aura
- Building inspections in Baringa
- Building inspections in Nirimba
- Building inspections in Harmony, Palmview
- Building inspections in Bells Creek
- Building inspections in Gympie
Inspection pricing in Sunshine Coast
Handover (PCI) Inspection FAQs — Sunshine Coast
Do you inspect in Aura, Harmony and the new Sunshine Coast estates?
Yes: Baringa, Nirimba, Banya, Gagalba, Harmony (Palmview), Sippy Downs, Little Mountain, Meridan Plains and surrounding suburbs, plus Gympie on request.
What's a practical completion certificate, and is it the same as your inspection?
No. The builder or certifier issues the certificate to say the home is complete. Our inspection is independent and checks the work against the QBCC Standards and Tolerances Guide before you accept it.
How quickly do I get the report?
It's sent to you on site, before we leave (unless there's no phone reception).
What does it cost?
$660 for homes under 220 m². Larger homes are quoted.
Should I book a 2nd PCI?
Yes, if the builder has to fix items. A re-inspection confirms the fixes before you sign the defects-liability paperwork.
More reading for Sunshine Coast
Your inspector
Your Sunshine Coast inspection is carried out by a VG Inspect builder-inspector — a QBCC-licensed builder who inspects new builds full-time. Every VG Inspect inspector is a builder first and holds their own QBCC licence, and every report is checked before it's sent. You can verify any licence on the QBCC online licence search. VG Inspect holds a 5.0 rating across over 100 verified reviews and is fully insured.
Book your Sunshine Coast handover (pci) inspection
Give us the date as early as you can — builders often give short notice. Same-day report.
Book an Inspection