What it is
Wall or floor tiles stuck on with spots of adhesive instead of a full, solid bed.
Why it matters
Hollow gaps behind the tiles mean less support. Tiles can crack when knocked, sound hollow, and leave voids where water can sit in wet areas.
How we check it
We tap tiles to listen for hollow spots and use a thermal camera, which shows the glue pattern behind the tiles.
The fix
Remove the affected tiles and re-lay them on a solid bed of adhesive.
How common it is
Tiles stuck on with dabs of adhesive show up clearly through our thermal camera.
What this means for your home
Tiles bedded on dabs of adhesive instead of a full bed — spot-fixing — leave voids behind the tile that sound hollow, crack under load and let water sit in wall tiling. The relevant standard requires the specified adhesive coverage, higher for wet areas and floors, precisely so the tile is fully supported. At handover a drummy tile is the tiler's to lift and re-bed while they are still returning for other work. Lived with, the hollow tile eventually cracks or, in a shower, lets water track behind the wall. We tap-test tiles across floors and wet-area walls listening for the hollow note, pay particular attention to large-format and floor tiles, and record the drummy ones so they are re-laid to full coverage before the bathroom is handed over and used. The drummy tiles are marked and photographed so the tiler re-beds them to full coverage. Tapping tiles across every floor and wet-area wall is slow work that a quick handover look never includes, yet it is the only way to find voids you cannot see. Fixing a hollow tile now, while the tiler is still returning, beats living with one that cracks under the washing machine or lets water behind the shower wall.
The standard
AS 3958; QBCC Standards and Tolerances Guide 2023, 12.1 and 12.2