What it is
Water sitting in a stormwater pipe that should drain away.
Why it matters
It points to a blockage or a pipe without enough fall. In a big storm, water backs up into the yard.
How we check it
We check stormwater risers and outlets for standing water.
The fix
Clear the line and confirm it drains freely to the legal point of discharge.
How common it is
We look down every stormwater riser we can find at handover.
What this means for your home
Ground or paving that holds water against the house after rain — rather than draining away from it — is one of the most consequential defects we find, because standing water at the slab edge works on the footing and the termite system every time it rains. The NCC and the QBCC guide require the finished ground to fall away from the building, typically at least 50 mm over the first metre. At handover, correcting the fall is regrading or adjusting a drain while the landscaper and civil contractor are still on site. Left alone, ponding undermines the slab edge, keeps the wall base permanently damp and bridges the termite barrier. We check the fall of the ground and paving on every elevation after we have run water or on a wet day, and photograph any area that holds water so the drainage is fixed before it becomes a structural conversation. We check the fall on every elevation after running water or on a wet day, and photograph any ponding against the required fall away from the house. Standing water at the slab edge is one of the few defects that works against the structure and the termite system at once, every time it rains. Correcting the grade now, while the landscaper is still on site, keeps it a drainage fix rather than a structural conversation down the track.