
What it is
The main water connection where the pipe meets the house wall is dripping.
Why it matters
Constant water at the slab edge, wasted water, and corroding fittings.
How we check it
We check the water inlet, meter and every external tap for drips.
The fix
Re-make the connection and check the slab edge is drying out.
How common it is
Part of the 16% of homes we found with an active leak at handover.
What this means for your home
The water inlet is the single point every drop in the house passes through, so a weep here is never cosmetic. At handover we check the main tap, the meter assembly and the first connections for seepage and for a meter that creeps with everything shut off. AS/NZS 3500.1 requires the service to be watertight and properly supported; a slow leak at the inlet undermines the ground around it, can track back along the pipe into the slab penetration, and wastes water you are billed for. Fixing it now is a plumber re-making one joint while the trench or the box is still accessible. Discover it a year in and you may be excavating a finished garden bed or cutting into a paved path to reach the same fitting. We photograph the inlet, the meter reading and any seepage so the item is unarguable on the report. A creeping meter with every tap off is the clearest proof of a hidden leak, and it is far cheaper to chase down now, at the one accessible fitting, than after a year of water bills and a saturated garden bed have made the cause obvious the hard way. We note the meter reading on the report so there is a baseline you can re-check yourself after the fix, and we are happy to return to confirm the meter has stopped creeping before you release the final payment.
As seen on our socials
