What it is
Plasterboard ceiling joints with no backing pieces fixed above them.
Why it matters
Back blocking holds the joint flat. Without it, ceiling joints are more likely to crack and show.
How we check it
We inspect the top side of the ceiling from the roof space.
The fix
Install back blocking to AS/NZS 2589.1, then repair any cracked joints.
How common it is
You can only see this from the roof space, which is why we go up on every handover.
What this means for your home
Ceiling sheets need back-blocking at the butt joints so the plaster does not crack along the join as the building moves and the timber dries out. The plasterboard manufacturer's installation manual and the NCC expect the joints to be formed and reinforced correctly. The pre-plaster and handover stages are when this is catchable — before the set is painted over, and from the room below at completion. Without back-blocking you get hairline cracks marching across the ceiling in the first year, which the builder will often call 'settlement' to avoid repairing. We check the ceiling joints and, where we can, the roof void above them for missing back-blocking, and photograph the at-risk joints so they are reinforced before the ceiling is set and painted and the cracks have a chance to appear. We photograph the at-risk joints and note them against the manufacturer's requirement so they are reinforced before the ceiling is painted. Cracks that march across a ceiling in the first year are almost always written off as movement unless you have documentation showing the joint was never back-blocked. Catching it at the pre-plaster or handover stage is what turns a future argument into a fixed defect.
The standard
QBCC Standards and Tolerances Guide 2023, 10.12; AS/NZS 2589.1