
What it is
Dented roof sheets, scratched or dented gutters and fascias, and missing rivets.
Why it matters
Dents hold water and damage the coating. Most owners never get up there to see it.
How we check it
We inspect the roof, gutters and flashings on every handover inspection.
The fix
Touch up or replace damaged sheets and gutter sections.
How common it is
76% of homes had at least one roof or gutter defect. Fascias, gutters or flashings were scratched or dented in 56%.
What this means for your home
Roof and gutter damage — dented sheets, poorly lapped flashings, gutters that do not fall to the downpipe — is one of the most common things we photograph at handover, and the roof is the one area an owner can almost never inspect themselves. The NCC and the manufacturer's specifications set minimum pitch, lap and fixing, and a gutter that holds water or a flashing that sheds the wrong way will leak in the first serious storm season, often into the roof void where you will not see it until the ceiling stains. At completion the roofer is still contracted and the fix is straightforward. We access the roof safely where we can and use elevated vantage points and photos where we cannot, so damage and poor falls are on the report while the builder still owns the problem. Everything we find on the roof is photographed from a safe vantage so it is on the report without you ever setting foot up there. Because the roof is the part of the home an owner can almost never check, it is where an independent inspection earns its keep most clearly — the difference between a roofer returning now and a mystery ceiling stain you are chasing through your first wet season.
The standard
ABCB Housing Provisions 2022, Table 7.2.5 (roof sheet fixing)


As seen on our socials
